 |
|||
|
|
|||
|
Page Title:
TABLE 4. TROUBLESHOOTING GUIDE - continued |
|
||
| ||||||||||
|
|
 TABLE 4. TROUBLESHOOTING GUIDE (Continued)
REMEDY
PROBABLE CAUSE
TROUBLE
6. TRANSMISSION, CONVERTER AND AXLE ADAPTOR (HYDRATORK DRIVE)
Release brake.
Parking brake not released
Machine will not move
in either direction
Readjust linkage.
Control linkage not properly
adjusted
Determine cause and correct. Fill to
Oil level low
proper level with Type "A" Auto-
matic Transmission Fluid Armour
Qualified.
Report to designated authority.
No oil pressure
Adjust linkage.
Control linkage not adjusted
Machine will move in
one direction only
Report to designated authority.
No oil pressure to directional
selector. Seals and "0" rings
in directional selector may
be defective
Report to designated authority.
Directional selector discs not
releasing. Discs defective. Relief
hole in D.S. drum clogged
Fill to correct level and determine
Oil level low
Machine moves slowly
cause for loss of oil.
in both directions at
wide open throttle
Report to designated authority.
Low oil pressure. Faulty inching
valve, faulty relief valve,
faulty pump
Report to designated authority.
Brakes dragging
Clean screen.
Clogged sump screen
Check and fill to correct level.
Transmission overheating Low oil
Report to designated authority.
Low directional selector
pressure (check with gauge).
Inching valve not functioning
properly
Report to designated authority.
Seals in selector defective
Report to designated authority.
Regulating valve sticking open
Report to designated authority.
Brakes dragging
4-82
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals