 |
|||
|
|
|||
|
Page Title:
TABLE 4. TROUBLESHOOTING GUIDE - continued |
|
||
| ||||||||||
|
|
 TABLE 4. TROUBLESHOOTING GUIDE (Continued)
REMEDY
PROBABLE CAUSE
TROUBLE
3. IGNITION SYSTEM (Continued)
Lubricate and free-up. If seized,
Distributor troubles
Distributor automatic advance
replace distributor.
(continued)
defective
Replace defective parts.
Distributor cap or rotor
shorted, cracked or broken
Report to designated individual in
Distributor rotor does not turn
authority.
Replace condenser.
Condenser defective
Replace spark plug.
Spark plug troubles
Cracked, broken, leaking, or
improper type
Install wires correctly.
Spark plug wires incorrectly
installed on plugs or in dis-
tributor cap
Clean, set gaps, or replace plugs.
Spark plugs dirty; gap
incorrect
Replace plug.
Spark plug porcelain cracked
or broken
4. STARTING MOTOR
Change to proper grade oil.
Engine oil too heavy
Starting motor cranks
engine slowly
Recharge or replace battery.
Battery charge low
Replace battery.
Battery cell shorted
Clean and tighten, or replace cables.
Battery connections corroded,
broken, or loose
Clean commutator.
Dirty commutator
Free-up or replace brush.
Insufficient brush surface contact
Replace starting motor.
Defective starting motor
Replace switch.
Starting switch defective
Change to proper grade oil.
Engine oil too heavy
Starting motor does not
crank engine
Replace or tighten loose connections.
Starting motor, Solenoid, or
cables defective; loose
connections
4-79
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals