 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Figure 4-2. Opening Side Panel
4 - 7 . AIR CLEANER (cont.)
a. Refer to figure 4-3 and remove wing nut (1)
When using compressed air to clean
from center stud (2) and remove element case (3).
element, do not place air nozzle too close
Wipe the inside of case clean.
to the element, as the air blast could
b . Remove element from air cleaner base (see
rupture the element. If the element cannot
be cleaned sufficiently to remove all dust
c . Tap the element on a hard, flat surface to
deposits, replacement of the element will
shake loose dirt and dust accumulations. Use
be required.
compressed air (100 psi max.) to blow away dust
loosened by tapping the element. Blow out inside
d. Check the element gasket for damage or
of element first.
deterioration, and replace as required.
4-7
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals