Click here to make tpub.com your Home Page

Page Title: DEPOSITING THE LOAD IN A STORAGE AREA.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Figure 3-4. Fork Latch Disengaged
Figure 3-5. Fork Latch Engaged
load is to be deposited. Depress the brake to halt
the truck.
b. Apply the parking brake and move the
direction shift lever to neutral position.
c. Move the tilt control forward to bring the
c. Drive the truck forward until the load is above
upright to the vertical position.
its resting place. To slowly maneuver the truck
forward while high engine speed is needed, use the
d. Move the lift control lever forward and
inching/brake pedal.
carefully lower the load to the ground. Continue to
lower the forks until they can be easily withdrawn
d. Pull back on the parking brake lever to apply
from under the load.
the parking brake.
e. Place the direction shift lever in reverse
e. Move the direction shift lever to neutral
position. Release the parking brake lever, and
position. Move the tilt control lever forward, tilting
slowly back the truck away from the deposited
forks, until the load is aligned with the tier.
load.
f. Move the lift control lever forward and
3-31. STOPPING THE TRUCK.
carefully lower the load into position on the tier.
Continue to lower the forks until they can be
a. Remove foot from the accelerator pedal.
easily withdrawn from the pallet.
b. Apply gradual pressure on the brake pedal to
g. Move the direction shift lever to reverse
bring the truck to a safe smooth stop. Avoid
position. Release the parking brake lever, and
sudden stops.
slowly back the truck away from the tiered stack
until the forks are clear.
c. Apply the parking brake. Move the direction
h. Move the lift control lever forward to lower
shift lever to neutral position.
the forks into normal traveling position (8 to 10
inches above surface).
d. Move the tilt control lever forward to bring
the upright to the vertical position.
3-30. DEPOSITING THE LOAD
IN A STORAGE AREA.
e. Move the lift control lever forward and lower
a. Carefully drive up to the position at which the
the forks to the ground.
3-7

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business