|
|
Figure 1-2. Cooling System Diagram
The engine
1-25.
ENGINE FUEL SYSTEM.
system is powered by a gear-type hydrau-
fuel system consists of the fuel tank
lic pump mounted on the timing gear
with a 10.5 gallon capacity that is built
housing cover and driven by the camshaft
into the left side of the truck frame, a
Major components of the power
gear.
fuel filter installed in the main fuel
steering system are the hydraulic pump
line between the tank and fuel pump, a
and a hydraulic cylinder, with an internal
diaphragm fuel pump and an up-draft carb-
control valve, that is anchored to a
urator that are part of the engine
The
welded bracket on the vehicle frame.
The fuel tank has a vented
assembly.
hydraulic control valve reacts to the
lock-type safety fuel cap, and built-in
steering wheel movement directing hydrau-
strainer.
lic fluid under pressure to extend or
retract the piston and assist in steering
The truck is
STEERING SYSTEM.
1-26.
The system permits manual
the vehicle.
steered by movement of the rear wheels.
steering of the truck when the engine is
Steering is accomplished by a combination
not running or when the hydraulic
of mechanical and hydraulic forces con-
steering is inoperative.
The
trolled by the steering wheel.
mechanical portion of the steering system 1-27.
EXHAUST SYSTEM.
Exhaust gases are
consists of a steering gear assembly, a
expelled from the engine manifold. TWO
drag link assembly that connects with the short exhaust pipes connect the exhaust
power steering cylinder, and a steering
manifold to the engine muffler, mounted
axle with two rods that connects the
above the steer axle.
steering spider of the axle with the
The steering booster
steering wheels.
1-5
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |