Click here to make tpub.com your Home Page

Page Title: PUMP REMOVAL
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 10-3930-644-14&P
3. Loose fuel line at carburetor.
pump cover. Tighten securely to prevent fuel
leakage.
4. Excessive use of hand choke.
2. Install filter screen and gasket in filter cover,
5. Punctured carburetor float.
place bowl in position and tighten clamp.
6. Defective carburetor needle valve.
3. Install elbow and flexible fuel line in top of filter
cover.
7. Incorrect carburetor adjustment.
G. PUMP  AND
FILTER
INSTALLATION
(ACC
C. PUMP REMOVAL
TRUCKS)
1. Lift operator's seat, and swing open right hand
1. Secure pump and filter assembly to engine with
side panel.
capscrews and lockwashers.
2. Close shut-off valve at sediment bowl.
2. Attach fuel lines from tank and carburetor. Make
certain all connections are tight.
3. Disconnect fuel outlet line to carburetor and
disconnect fuel inlet hose from supply line from
3. Open shut-off valve at filter and start engine.
fuel tank.
Check all connections for leaks.
4. Remove the pump mounting capscrews and
4. Swing shut the right hand side panel and lower
lockwashers and lift pump from engine.
the operator's seat.
5. Wash pump and sediment bowl with a solvent
H. FILTER ASSEMBLY (ACP TRUCKS)
and dry with compressed air.
1. Install elbow in filter cover and install cover on
D. FILTER DISASSEMBLY
fitting in full tank (Fig. 1-3).
1. Remove flexible fuel line and elbow from fuel
2. Install filter screen and gasket in filter cover.
filter cover. Leave shut-off valve open.
Install bowl and tighten clamp.
2. Loosen clamp nut, move clamp to one side and
3. Connect fuel hose to filter.
remove sediment bowl, gasket and screen.
I. PUMP INSTALLATION (ACP TRUCKS)
E. INSPECTION
1. Install pump and gasket on engine and secure
Clean and rinse all parts in an approved solvent and dry
with capscrews and lockwashers.
with compressed air.
2. Attach fuel line from filter and fuel line to
Make a visual check for cracks and breakage. Examine
carburetor.
all threaded holes and filter screen. Replace broken or
damaged parts.
3. Open shutoff valve at filter and start engine.
Check all connections for leak! 4.  Close the
F. FILTER ASSEMBLY (ACC TRUCKS)
right hand side panel and lower operator's seat.
1. Install filter cover nipple and filter cover on fuel
R-123-1
3-58

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business