CLEANING - TM-10-3930-638-24-P0968

TM 10-3930-638-24&P

4-4.

TRANSMISSION

MAINTENANCE

(cont)

e. Transmission Housing (cont).

REMARKS

ACTION

ITEM

STEP

LOCATION

CLEANING (cont)

WARNING

Wear safety glasses when drying parts with compressed air. Fail-

ure to do so could cause serious injury to eyes and possible blind-

ness. If you hurt your eyes or if a foreign object is blown into

your eyes, seek medical attention immediately.

Clean

Use cleaning solvent P-D-680. Thoroughly

Transmission

clean interior and exterior of housing.

housing (34)

Dry thoroughly using moisture free com-

pressed air or clean cloths

Clean

Use cleaning solvent P-D-680. Immerse

AU other parts

parts in cleaning solvent and move slowly

up and down until parts are thoroughly

cleaned. Dry thoroughly using moisture

free compressed sir or clean cloths

INSPECTION

Inspect

Inspect tubes for cracks, damage, wear or

Transmission

evidence of leaking condition. If any of

housing (34)

these conditions are observed, remove and

replace tubes. Inspect housing for cracks,

damage, wear, pits, nicks and distortion.

if any of these conditions are observed,

replace housing

inspect

Inspect for cracks, pits, wear, distortion,

All other parts

and damaged condition. If any of these

conditions are observed, replace part

REASSEMBLY

Transmission

a. Lubrication clutch

Position

housing (34)

tube (31)

b. Tube sleeve (33)

Position and

Over forward end of clutch tube (3 1).

press

Press firmly into bore of housing

NOTE

Tube ends must remain flush with face of housing.

4 - 1 9 0 Change 1