 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-633-24&P
4-4.
TRANSMISSION
MAINTENANCE
(cont)
e.Transmission Housing (cont).
REMARKS
ACTION
ITEM
LOCATION
STEP
REASSEMBLY (cont)
9
c. Tube sleeve (33)
Install
You must use an expander tool to install
(cont)
lubrication clutch
tube sleeves and tubes. Pull mandrel
tube (31)
shaft out of tool as far as possible and
insert expander in tube. Turn mandrel
by hand until tool is firmly seated. Use
a wrench to turn mandrel as far as possi-
ble. Back off mandrel and remove tool
Lubricate with OE10 (refer to
d. O-ring (32)
Install
current lubrication order)
e. Third speed
Position
tube (26)
f. Tube sleeves
Position and
Over ends of tube (26). Press firmly into
(28 and 30)
press
bore of housing
NOTE
Tube ends must remain flush with face of housing.
g. Third speed
Install
Use expander tool
tube (26)
Lubricate with OE10 (refer to
h. O-rings (27
Install
current lubrication order)
and 29)
i. Low speed clutch
Position
pressure tube (21)
j. Tube sleeves (23
Position and
Over ends of tube (21). Press firmly into
and 25)
press
bore of housing
NOTE
Tube ends must remain flush with face of housing.
k. Low speed clutch
Install
Use expander tool
pressure tube (21)
Change 1
4-191
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals