3-20. AXLES AND DIFFERENTIAL CARRIER ASSEMBLIES MAINTENANCE
a. Front Axle Assembly.
This task covers:
No. 1 Common Organiza-
Vehicle parked on level surface, engine
tional Maintenance Tool Kit
Jack Stands, 4 ton capacity (2)
off, rear wheels blocked, and parking
Chain Hoist, 10 ton capacity
Roller Jack, one ton capacity
Shipping lock pin installed.
Front drive shaft assembly disconnected
Hard Wooden Block (2),
from front axle assembly differential
6 by 6 by 18 inches
Front chassis raised (use chain hoist) and
securely blocked (use jack stands).
Hose (FSCM 81343 P/N SAE30R2TYPE1-1-41D)
Front wheels and tires removed.
Brake hoses, lines and fittings discon-
nected from front axle assembly housing
and wheel cylinders.