DISASSEMBLY (cont) - TM-10-3930-638-24-P0612

TM 10-3930-636-24&P

3-13. STARTER AND SOLENOID REPAIR (cont)

ITEM

ACTION

LOCATION

REMARKS

STEP

DISASSEMBLY (cont)

h. Four screws (43)

Remove

i. Four nuts (44)

Remove

(cont)

j. Four lock washers

Remove and

discard

(45)

k. Two control assem-

Remove

blies (46)

NOTE

Do not remove screw (47), lock washer (48), connector (2) or

grommet (49) unless replacement is required.

l. Screw (47)

Remove

m. Lock washer (48)

Remove

n. Connector (2)

o. Grommet (49)

Remove

NOTE

Do not remove field coil assembly (52), pole shoes (51) or screws

(50) unless parts need replacement.

p. Eight screws (50)

Remove

q. Four pole shoes (51)

Remove

r. Field coil assembly

Remove and

release

(52)

CLEANING

Wipe with a clean, dry, lint-free cloth only.

Armature (10), drive

Clean

Do not use cleaning solvent

assembly' 15), solenoid

switch (24), brushes

(39), grommet (49)

and coil assembly (52)

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or exces-

sive heat and don't smoke when using it. Failure to do so could

cause serious injury. If you become dizzy while using cleaning

solvent, get fresh air immediately, and get medical attention. If

contact with skin or clothes is made, flush with large amounts of

water. If contact with eyes is made, wash eyes with water immedi-

ately, and obtain medical aid immediately.

3-106