 |
|||
|
|
|||
|
Page Title:
Transmission Linkage Controls (cont). |
|
||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-38. TRANSMISSION MAINTENANCE (cont)
b. Transmission Linkage Controls (cont).
ACTION
REMARKS
ITEM
STEP
LOCATION
REMOVAL (cont)
3
Engine compart-
Mark for proper
Cables (53, 54)
installation
ment
4
Link (31)
a. Four nuts (26)
Remove
b. Four lock washers (27)
Remove
Remove
c. Four washers (28)
Remove
d. Four spacers (29)
e. Four cap screws (30)
Remove
NOTE
Remove four nuts (26), lock washers (27), washers (28), spacers
(29) and cap screws (30) from two links (31).
5
a. Two links (31)
Remove
Outer bellcrank
(38), inner bell-
b. Two cotter pins (32)
Remove
c. Two clevis pins (33)
Remove
crank (39)
d. Two clevises (34)
Slide off and remove
e. Two nuts (35)
Remove
6
a. Two nuts (36)
Remove
Transmission
b. Washer (37)
Remove
Remove
c. Outer bellcrank (38)
d. Inner bellcrank (39)
Remove
e. Spacer (40)
Remove
f. Stud (41)
Remove
g. Two cap screws (42)
Remove
h. Two lock washers (43)
Remove
i. Cable bracket (44)
Remove
7
a. Four nuts (45)
Remove
Operator's com-
b. Four lock washers (46)
Remove
partment, under
floor panel
Remove
c. Three spacers (47)
Remove
d. Four cap screws (48)
Remove
e. Washer (55)
Remove
f. Clamp (49)
Remove
g. Two cable hold down
plates (50)
Remove
h. Two cable clamps (51)
Remove
i. Two tie straps (52)
j. Two cables (53 and 54)
Remove
2-216
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals