 |
|||
|
|
|||
|
Page Title:
Transmission Linkage Controls (cont). |
|
||
| ||||||||||
|
|
 TM 10-3930-638-24&P
2-38. TRANSMISSION MAINTENANCE (cont)
b. Transmission Linkage Controls (cont).
ACTION
ITEM
REMARKS
STEP
LOCATION
INSPECTION
Tighten loose parts; replace missing parts
Inspect for loose
1
Instrument panel,
a. Speed control lever
or missing parts
bottom, trans-
Tighten loose parts; replace missing parts
Inspect for loose
b. Direction control
mission control
lever
or missing parts
Tighten loose parts; replace missing parts
Engine compart-
a. Inspect for
Linkage (at control valve)
2
loose or
ment
missing parts
If necessary, disassemble and inspect parts
b. Check that
if control valve spools do not move
when levers
are moved,
linkage causes
control valve
spools to move
REMOVAL
Remove
1
Instrument panel, a. Nut (1)
Remove
bottom. speed
b. Lock washer (2)
Detach and remove From cable (53)
control lever
c. Ball joint (3)
Remove from ball
d. Nut (4)
joint (3)
e. Nut (5)
Remove
f. Two washers (6 and 13) Remove
g. Nut (7)
Remove and sup-
port bracket (8)
Remove
h. Washer (9)
i. Bracket (8)
Remove
Remove
j. Spring (10)
Remove
k. Spacer (11)
Remove
l. Cap screw (12)
Remove
m. Nut (14)
n. Speed control lever (15) Remove
o. Control lever knob (16) Remove
Remove
2
Instrument panel, a. Cotter pin (17)
Remove
bottom, direction b. Clevis pin (18)
Detach and remove
c. Clevis (19)
control lever
from cable (54)
Remove
d. Nut (20)
Remove
e. Cap screw (21)
f. Two washers (22)
Remove
g. Control lever knob (23) Remove
Remove
h. Direction control lever
(24)
Remove
i. Two nuts (25)
j. Two cables (53 and 54) Loosen nuts, detach
from bracket and
mark for proper
installation
2-215
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals