Stop and Tail Light (cont). - TM-10-3930-638-24-P0192

TM 10-3930-638-24&P

2-30. LIGHT SYSTEMS MAINTENANCE (cont)

d. Stop and Tail Light (cont).

REMARKS

ITEM

ACTION

LOCATION

STEP

INSTALLATION/REPLACEMENT

(cont)

Install

Push lamp in socket assembly (5), turn

Light brackets at a. Lamp (6)

rear of vehicle

clockwise and release

b. Lens (4)

Install

Turn clockwise on socket assembly (5)

hand-tight only

c. Lens (4) and socket

Position

On light bracket

assembly (5)

d. Lock washer (3) and

Install and

Until stop and tail light is securely

nut (2)

tighten

mounted

e. Two wire leads (1)

Push on

Harness connectors

TESTING

Instrument panel

a. IGNITION switch

Place in ON

position

b. VEHICLE LIGHTS

Place in SER

DRIVE position

switch

Rear of vehicle

Tail lights should be on; have an assistant

Stop and tail lights

Check

depress service brake and check that stop

light is on; if lights are on, place IGNI-

TION and VEHICLE LIGHTS switches

in OFF positions

NOTE

If stop and/or tail lights are not on, refer to troubleshooting,

paragraph 2-24 and troubleshoot light systems.

2-156