Stop and Tail Light (cont). - TM-10-3930-638-24-P0191

TM 10-3930-638-24&P

2-30. LIGHT SYSTEMS MAINTENANCE (cont)

d. Stop and Tail Light (cont).

REMARKS

ITEM

ACTION

LOCATION

STEP

REMOVAL

Light brackets at a. Two wire leads (1)

Tag, grasp and

From harness leads

rear of vehicle

pull

b. Nut (2) and lock

Remove

washer (3)

c. Lens (4) and socket

Lift and remove

From light bracket

assembly (5)

d. Lens (4)

Turn counterclockwise and lift from

Unscrew and

remove

socket assembly (5)

e. Lamp (6)

From socket assembly (5)

Depress, turn

counterclock-

wise and lift

CLEANING

WARNING

Dry cleaning solvent (P-D-680), used to clean parts is toxic and

flammable. Wear protective goggles and gloves and use only in a

well ventilated area. Avoid contact with skin, eyes, and clothes

and don't breathe vapors. Do not use near open flame or

excessive heat and don't smoke when using it. Failure to do so

could cause serious injury. If you become dizzy while using

cleaning solvent, get fresh air immediately, and get medical

attention. If contact with skin or clothes is made, flush with large

amounts of water. If contact with eyes is made, wash eyes with

water immediately, and obtain medical aid immediately.

Socket assembly (5),

Clean

Use cleaning solvent P-D-680 on metal

wire terminals and

parts only

connectors, and hardware

Lens (4)

Wipe with a clean dry cloth

Clean

INSPECTION

All hardware

Inspect

Replace if worn, or threads damaged

All wiring

Inspect

Replace if insulation frayed, or if

conductors broken

Lens (4)

Inspect

Replace if cracked or deteriorated

Socket assembly (5)

Inspect

Replace if wires, connectors or socket

damaged

2-155