Seat - TM-10-3930-634-120080

TM 10-3930-634-12

Figure 4-44. Roll over protective structure, removal and installation.

4-72. Seat

(2) Inspect the mounting hardware for cracks and

a. Removal. Refer to figure 4-45 and remove the

breaks, Replace all defective parts.

seat.

c. Installation. Refer to figure 4-45 and install seat

as follows: reposition seat on base and attach with four

b. Cleaning and Inspection.

washers, lockwashers and nuts.

(1) Clean controls and mounting hardware with an

approved cleaning solvent and dry thoroughly.

d. Adjustment. Forward and aft adjustment may be