Section XVIII. MAINTENANCE OF HOOD AND BODY

TM 10-3930-634-12

Figure 4-42. Installing high pressure hose fittings.

Section XVIII. MAINTENANCE OF HOOD AND BODY

4 - 7 0 . Engine Hood and Panels

(3) Inspect the hood and panels for dents, cracks,

a. Removal. Refer to figure 4-43 and remove the

and other damage. Inspect hardware for wear, cracks,

engine hood and side panels.

and other damage. Replace all defective parts.

b. Cleaning and Inspection.

c. Installation. Refer to figure 4-43 and install the

engine hood and side panels by reversing the removal

(1) Clean all parts thoroughly using approved dry

cleaning solvent (P-D-680) or equal.

procedure.

(2) Remove rust with a wire brush.