Section XVII. MAINTENANCE OF HYDRAULIC PUMPS AND HOSE

TM 10-3930-634-12

4-65. Drag Link

a. Removal. Refer to figure 4-37 and remove drag

link.

b. Inspection. Inspect drag link for binding, breaks

and bends. Check mounting hardware for security.

Replace a defective drag link.

c. Installation. Refer to figure 4-37 and install drag

link.

d. Adjustment. Tighten nut, then back off approx-

imately turn and install cotter pin.

Figure 4-37. Drag link, removal and installation.

Section XVII. MAINTENANCE OF HYDRAULIC PUMPS AND HOSE

4-66. Rear Steering Pump

with dry cleaning solvent (P-D-680).

(2) Inspect the body and cover for cracks and

a. General. The rear steering pump is mounted on

the torque converter and supplies pressure for the rear

damage. Replace defective pump with another new or

steering cylinders only. For access to the rear steering

serviceable pump.

pump, remove the forward panel under the right rear

d. Installation.

fender.

(1) Install a new gasket between pump and torque

converter. Refer to figure 4-38 and install the rear

b. Removal. Refer to figure 4-38 and remove the rear

steering pump by reversing the removal procedure.

steering pump.

c. Cleaning and Inspection.

(2) Reconnect four hydraulic lines.

(1) Wipe the pump clean using a cloth dampened