Section XII. MAINTENANCE OF THE TRANSMISSION

TM 10-3930-634-12

Section XII. MAINTENANCE OF THE TRANSMISSION

4-52. General

ing solvent and dry thoroughly. Make sure old gasket

This section contains information on the maintenance

material is removed, install new filter element and

of the transmission to the extent required of organiza-

gasket.

tional maintenance personnel.

(2) Inspect the filter for cracks, breaks and loose

connections. Check the oil for contamination.

4-53. Transmission External Filter

c. Installation. Refer to figure 4-30 and install the

a. Removal. Remove the forward panel under the

transmission external filter as follows:

right rear fender. Refer to figure 4-30 and remove the

(1) Use four screws and lockwashers to attach the

transmission external fitter as follows:

filter to the mounting bracket.

(1) Tag and disconnect two hydraulic lines.

(2) Reconnect two hydraulic lines.

(2) Remove four mounting screws and lockwashers

(3) Service transmission in accordance with cur-

to remove filter from forklift truck.

rent lubrication order.

NOTE

Change filter element at every

Refer to current lubrication order

transmission oil change. The filter

for maintenance instructions of in-

element is a throw-away type paper

ternal oil filter screen.

element.

b. Cleaning and Inspection.

(4) Reinstall forward panel under the right rear

(1) Clean the filter head with an approved clean-

fender.

Figure 4-30. Transmission external filter, removal and instillation.