 |
|||
|
|
|||
|
Page Title:
Figure 14-3. Reverse Clutch Pack, Exploded View. |
|
||
| ||||||||||
|
|
 TM 10-3930-632-34
h. Remove capscrews (15) and pull oil pump
(1) Remove nut (1, fig. 14-3), outer bearing (2) and
retainer ring (3). Slide shaft spacer (4) from shaft.
cover (17), gaskets (18) and screen (19) from bottom of
Remove thrust washer (5).
housing. Remove drain plug (16).
I.
Disassemble the reverse clutch pack (13) as
follows:
1.
Nut
11.
Drive shaft
2.
Outer bearing
12.
Retainer ring
3.
Retainer ring
13.
End plate
4.
Shaft spacer
14.
Internal tooth clutch disc
5.
Thrust washer
15.
External tooth clutch disc
6.
Inner seal
16.
Release spring
7.
Retainer ring
17.
Clutch piston
8.
Inner bearing
18.
Inner seal
9.
Bearing spacer
19.
Outer seal
10.
Gear and bushing
20.
Drum and hub
Figure 14-3. Reverse Clutch Pack, Exploded View.
(2) Pull inner seal (6), retainer ring (7) and inner
(5) Pull clutch piston (17) from drum and hub (20).
bearing (8) from end of shaft (11). Remove bearing
Remove inner and outer seals (18 and 19).
j.
Disassemble the forward clutch pack as
spacer (9).
(3) Slide gear and bushing (10) and shaft (11)
follows:
from assembly.
Refer to figure 14-4. Note that the parts are very
(4) Compress and remove retainer ring (12).
similar to those of the reverse clutch pack. Follow the
Slide end plate (13) from drum and hub (20). Remove all
same procedure to disassemble the forward clutch pack
internal and external tooth clutch discs (14 and 15).
as outlined for reverse clutch pack.
Remove release springs (16)
14-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals