|
|
TM 10-3930-632-12
Section XXI deleted.
4-80. Differential
a. Service.
(1) Locate drain plug -on the under side of
the differential housing.
(2) Drain differential when hot. Allow to
drain completely into a suitable container.
(3) Fill differential with oil as outlined in
Lubrication Order LO 10-3930-632-12.
Section XXII. TRANSMISSION
4-81. General
b. The transmission fluid is cooled by heat-
a. The transmission is mounted between the
exchanger action in the lower part of the radiator. The
fluid is pumped from the torque converter, through a
engine and drive axle assembly, immediately below the
filter, through the radiator and back to the transmission.
operator's compartment floor plates. The transmission
is connected to the torque converter on one end and to
4-82. Transmission Oil Filter and Lines
the differential pinion gear on the other. It is a constant-
a. Filter Service. Service the transmission oil
mesh, full reversing, power-shifted type. The forward
filter as directed in paragraph 4-8, e.
and reverse directions are selected by positioning the
b. Removal and Disassembly. Remove and
direction shift lever mounted on the steering column.
The direction shift lever is connected by mechanical
disassemble the transmission oil filter and lines as
linkage to the selector lever on the top of the
shown in figure 4-60.
transmission.
Change 2 4-76
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |