Flywheel Housing, Removal and disassembly

TM 10-3930-630-34

c. Refer to paragraph 2-27 and install torque

converter and transmission.

d. Refer to paragraph 2-24 and install the engine.

11-31. Flywheel Housing, Removal and

Disassembly

a. Removal.

(1) Refer to paragraph 2-22 and remove the

engine and transmission.

(2) Refer to paragraph 2-25 and remove

transmission and torque converter.

(3) Refer to paragraph 11-28 and remove the

flywheel.

(4) Loosen screws on oil pan adjacent to the

flywheel housing.

(5) Remove two screws (1 and 2, fig. 11-35)

and lock washers (3) opposite each other and install two

guide studs (7/16 - 14 x 4 inches long). Remove

remaining screws (1 and 2) and lock washers (3) and

remove flywheel housing over guide studs. Remove

guide studs.

TA067474

Figure 11-34. Checking flywheel counterbore.

TA067475

1. Screw

3. Lock washer

2. Screw

4. Flywheel housing

Figure 11-35. Flywheel housing, removal, and installation.

11-23