Installation. - TM-10-3930-630-120062

TM 10-3930-630-12

Figure 4-24. Hydraulic filter, installed view.

(c) Loosen hose clamps and

(2) Installation.

(a) Install correct elbows and fittings

disconnect inlet outlet hoses (fig. 4-24) from filter head.

Plug hoses and filter.

in filter head. Check to see that new packing is installed

(d) Disconnect indicator hoses from

with elbow used with steering system return hose.

(b) Install new filter on bracket and

filter head.

(e) Remove screws and lockwashers

secure with screws and lockwashers.

(c) Unplug and connect indicator

attaching filter head to bracket. Remove filter from

bracket.

hoses to fittings in filter.

(f) Remove all elbows and fittings

(d) Remove plugs from inlet and

from filter head.

outlet hoses

4-34