CHAPTER 4 ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

TM 10-3930-630-12

CHAPTER 4

ORGANIZATIONAL MAINTENANCE INSTRUCTIONS

Section I. SERVICE UPON RECEIPT OF TRUCK

4-1.

Inspecting and Servicing the Equipment

damage that may have occurred in shipment.

Remove tape, paper and other packing

a. When a truck is received by the using

materials. Remove forks from truck by removing strap-

ping and tie downs. Install forks on carriage as shown in

organization, it must be serviced to prepare it for

operation. The services required are described below.

b. Carefully inspect truck for any signs of

dents or

INSTALLATION

1. RELEASE FORK LOCK BY TURNING POINT UP.

2. SLIDE FORK IN LINE WITH SLOT ON CARRIAGE.

LIFT FRONT OF FORK UP AND SLIDE INTO

POSITION.

3. TURN POINT OF FORK LOCK DOWN TO LOCK

FORK IN NOTCH ON CARRIAGE.

REMOVAL

1. TURN POINT UP TO RELEASE FORK LOCK.

2. SLIDE FORK IN LINE WITH SLOT ON CARRIAGE.

LIFT FRONT OF FORK UP AND REMOVE FROM

CARRIAGE.

ADJUSTMENT

1. RELEASE LOCK.

2. SLIDE FORK IN LINE WITH NOTCH AND LOCK IN

POSITION.

TA034776

Figure 4-1. Removing, installing or adjusting carriage forks.

4-1