Hydraulic Reservoir Breather - TM-10-3930-628-120085

TM 10-3930-628-12

compressed air. If element cannot he cleaned or is

4-50.

Hydraulic Reservoir Breather

damaged, replace breather.

a. Removal. Remove floor plate and toe

c. Installation. Install the hydraulic reservoir

plate. Refer to figure 4-29 and remove the breather from

breather as follows:

the hydraulic reservoir as follows:

(1) Install filter element (fig. 4-30 in breather

(1) Remove breather from hydraulic oil

and secure with element screw.

reservoir.

(2) Check oil level on level gage (fig. 4-29).

(2) Remove element screw (fig. 4-30) from top

Add oil (OE) to bring level to FULL mark on gage.

of breather and remove breather element (fig. 4-30)

(3) Install breather on reservoir.

from inside of breather.

d. Assembly. Install floor and toe plates on

b. Cleaning and Inspection. Clean the filter

truck to cover reservoir.

element with hydraulic oil or with a reverse flow of

Figure 4-29. Hydraulic oil reservoir and breather, installed view

4-29