 |
|||
|
|
|||
|
Page Title:
Figure 4-9. Fuel filter, exploded view. |
|
||
| ||||||||||
|
|
 TM 10-3930-627-12
b. Removal.
with SD and be sure no sediment or lint remains in the
bowl.
(1) Close fuel shutoff cock (6, fig. 4-7) at
(4) Using new gaskets, install bowl. Swing
fuel filter (5).
the bail back in place and tighten the nut.
(2) Disconnect fuel line (2) at fuel filter.
(3) Remove fuel filter from elbow (3) at fuel
tank.
c. Installation. Reverse procedure in b above.
4-28. Accelerator Pedal and Linkage.
a. Removal and Disassembly.
(1) Remove cotter pin (2, fig. 4-10) and pull
pedal (1) free of ball on rod (7). Remove floor plate and
raise engine cover for access to the rest of the linkage.
(2) Remove return spring (11) and clips (9
and 10). Remove throttle rod (14).
(3) Remove cotter pin (16), washers (15)
and take cross shaft (8) from frame. Remove remaining
hardware as required.
1.
Cover
2.
Gasket, element
3.
Element
4.
Gasket, bowl
5.
Bowl
6.
Bail
7.
Nut
Figure 4-9. Fuel filter, exploded view.
4-14
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals