 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 1. Screw
2. Lockwasher
3. Back cushion
4. Bottom cushion
5. Screw
6. Washer
7. Nut
8. Slide
Figure 4-16. Seat assembly
(1) Remove seat and slides by removing
dampened with water.
four bolts, lockwashers and nuts.
(3)
Inspect cushions for holes, tears,
(2) Remove back seat cushion by removing
cracks and wear.
three screws and lockwashers.
(4) Inspect for breaks, cracks, dents, loose
(3)
Remove bottom seat cushion by
or missing hardware, or other defects.
removing four screws and lockwashers.
(5) Tighten or replace loose or missing
(4) Remove each slide by removing two
hardware. Replace defective slides.
c. Repair.
screws and nuts.
b. Cleaning and Inspection.
(1) Sew rips or tears in cushions.
(1) Clean metal parts with an approved
(2) Straighten sheet metal bent out of
cleaning solvent (Federal Specification P-D-680) and dry
shape.
d. Installation. Installation is the reverse of
thoroughly.
(2) Wipe seat cushions with a clean cloth
removal.
4-29
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals