 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 Caution: Ensure that the pipe is flush
4-6. Front Axle Assembly (Drive)
against the drive axle housing.
a. Removal. For removal of the front- axle
(4) Install a washer and nut on the spindle
assembly, refer to paragraph 2-10.
and tighten the nut until the spindle is loose on the
b. Disassembly.
housing.
(1) Remove the drive wheels. Refer to TM 10-
(5) Remove the nut. washer and pipe.
3930-024-12. For repair, refer to paragraph 4-15.
Remove the locknut (1), washer (2) and spindle
(2) Loosen the locknut (1, fig. 4-14) at the
(3).
backside of the axle housing two or three turns.
(3) Place a pipe 23/4 in. I.D. and 5 in. long
over the spindle (3).
ME 3930-624-34/4-14
11. Seal
Locknut
1.
21. Capscrew
12. Bearing
Washer
2.
22. Lockwasher
13. Bearing cup
Spindle
3.
23. Backing plate
14. Bolt
Capscrew
4.
24. Seal
13. Lockwasher
5.
Lockwasher
25. Plug
16. Cover
Axle shaft
6.
26. Plug
17. Gasket
Locknut
7.
27. Plug
18. Capscrew
Lockwasher
8.
28. Breather
19. Lockwasher
Tongued washer
9.
29. Housing
20. Dust cover
10.
Cap
Figure 4-14. Front axle and axle housing, exploded view.
(6) Remove the capscrews (4) and lock-
end of the axle shaft (6). and carefully remove the
washers (5). Install a weight puller in the threaded
axle shaft.
4-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals