Inspect and Repair.

retainer from end frame. Place a piece of tape over

(CHECK FOR GROUNDS)

the bearing and over the slip ring assembly on the

rotor shaft.

(8) Remove brushholder, brushes

and

springs.

(9) Remove capacitor, diodes, and heat sink

from end frame.

NOTE

Do not wash alternator parts in a

cleaning solvent.

c. Cleaning. Clean all parts with a dry, lint-i/ce

cloth. Use filtered compressed air to blow dust dirt from

end frames.

d. Inspect and Repair.

A. ROTOR

B. STATOR

ME 3930-618-34/3- 2

Figure 3-2. Checking rotor and stator for shorts,

grounds, and open circuits.

3-2