Figure 2-2. Torque converter removal and installation.

(b) Place scale across tangs of

converter and another scale front flyweel housing face to

the first scale (fig. 2-3).

A. SEPARATING CONVERTER

FROM FLYWHEEL

A. CHECKING CONVERTER TANG DEPTH

B. CONVERTER PILOT AND SHIM

ME 3930-618-34/2-2

B. Converter pilot and shim

3 Plate, drive

1 Bolt

4 Shim

2 Plate. reinforcing

5 Converter

Figure 2-2. Torque converter removal and installation.

d. Assembly of Power Plant.

(1) Torque converter installation.

(a) Without shims (fig. 2-2) on pilot,

install converter on flywheel. Tighten capscrews.

NOTE

When installing converter it is

B. CHECKING CONVERTER ALIGNMENT

important that tongs of converter

ME 3930-618-34/2-3

extend to a proper depth into pump.

Figure 2-3. Converter installation.

2-8