 |
|||
|
|
|||
|
Page Title:
Parking Brake Shoes (Drive Axle Removed) |
|
||
| ||||||||||
|
|
 TM 10-3930-611-35
1.
Nut (24 reqd)
43.
Washer, lock (16 reqd)
2.
Washer (24 reqd)
44.
Plate, brake backing (2 reqd)
3.
Dowel (12 reqd)
45.
Dowel (4 reqd)
4.
Brake drum & wheel (2 reqd)
46.
Dowel (4 reqd)
5.
Tire, rubber cushion (2 reqd)
47.
Spring (4 reqd)
6.
Plug, brake inspection hole (2 reqd)
48.
Cam bolt assy, adjusting (4 reqd)
7.
Plug, brake inspection hole (2 reqd)
49.
Screw, cap (24 reqd)
8.
Spring, return (2 reqd)
50.
Washer, lock (24 reqd)
9.
Rod, anti-rattle (2 reqd)
51.
Case; F.D. gear (2 reqd)
10.
Retainer (8 reqd)
52.
Stud (12 reqd)
11.
Spring (4 reqd)
53.
Stud (4 reqd)
12.
Retainer (ref item #10)
54.
Gasket (2 reqd)
13.
Washer (as reqd, approx 4 reqd)
55.
Seal, oil (2 reqd)
14.
Assy, brake shoe and lining (4 reqd)
56.
Cap, wheel (2 reqd)
15.
Spring, retaining
57.
Pin, cotter (2 reqd)
16.
Tube assy, brake actuating (2 reqd)
58.
Nut, wheel spindle (2 reqd)
17.
Tube assy, bleeder
59.
Washer, hub bearing nut (2 reqd)
18.
Tube assy, bleeder
60.
Gear, F.D. internal (2 reqd)
19.
Adapter, brake bleeder screw (2 reqd)
61.
Cone outer gear bearing (2 reqd)
20.
Elbow, brake line fitting (6 reqd)
62.
Cup, outer gear bearing (2 reqd)
21.
Adapter. hydr brake cyl (2 reqd)
63.
Cone, inner gear bearing (2 reqd)
22.
Gasket, hydr inlet adapter (2 reqd)
64.
Cup, inner gear bearing (2 reqd)
23.
Fitting, brake line
65.
Stud, brake drum and drive gear (24 reqd)
24.
Elbow, brake line (ref item #20)
66.
Nut (6 reqd)
25.
Fitting, brake line
67.
Nut (2 reqd)
26.
Nut, jam (4 reqd)
68.
Washer, lock (6 reqd)
27.
Washer (4 reqd)
69.
Bolt (6 reqd)
28.
Screw, cap (4 reqd)
70.
Bolt (2 reqd)
29.
Elbow, brake line fitting
71.
Spindle, wheel (2 reqd)
30.
Fitting, bleeder screw
72.
Shaft, axle (2 reqd)
31.
Fitting, bleeder screw
73.
Nut (16 reqd)
32.
Screw, bleeder (2 reqd)
74.
Washer (8 reqd)
33.
Nut, jam (ref item #26)
75.
Dowel (8 reqd)
34.
Washer (ref item #27)
76.
Stud (16 reqd)
35.
Screw, cap (ref item #28)
77.
Washer, lock (8 reqd)
36.
Washer, lock (6 reqd)
78.
Housing, axle LH
37.
Screw, cap (6 reqd)
79.
Housing, axle RH
38.
Spacer (2 reqd)
80.
Gasket (18 reqd)
39.
Cyl assy, brake RH
81.
Bearing, axle shaft (2 reqd)
40.
Cyl assy, brake LH
82.
Collar, axle shaft brg ret (2 reqd)
41.
Push rod, cyl (4 reqd)
83.
Cone, differential brg (2 reqd)
42.
Nut (16 reqd)
84.
Cup, differential brg (2 reqd)
Figure 3-28. Drive axle, wheel cylinder and brake shoe assembly, disassembly and reassembly.
3-24. Parking Brake Shoes (Drive Axle Removed)
c.
Installation.
a. Removal.
(1) Refer to figure 3-29 and install the
parking brake shoes.
(1) Remove the drive motor (para 3-3).
(2) Install the parking linkage (TM 10-3930-
(2) Refer to figure 3-29 and remove the
611-12, para 3-42).
parking brake shoes.
b. Cleaning and Inspection.
(3) Install the drive motor (para 3-3).
(4) Install the drive axle assembly (para 3-
(1) Wipe the brake shoe with a clean, dry
cloth. Clean all other parts with dry cleaning solvent
3-25. Parking Brake Drum and Mounting Plate
(Federal Specification P-D-680) and dry thoroughly.
a. Removal.
(2) Inspect lining for glaze and for grease or
oil soaked condition. Inspect for breaks, cracks, loose or
(1) Remove the brake shoes (para 3-24).
missing mounting hardware, worn lining or other defects.
(2) Refer to figure 3-30 and remove the
(3) Tighten or replace loose or missing
brake drum and mounting plate.
b. Cleaning and Inspection.
mounting hardware. Replace brake shoes if glazed,
grease or oil soaked, or if lining thickness is less than 1/8
(1) Clean all parts with dry cleaning solvent
inch.
(Federal Specification P-D- 680, and dry thoroughly.
3-35
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals