Figure 3-14. Hydraulic pump, disassembly and reassembly.

TM 10-3930-611-35

Figure 3-14. Hydraulic pump, disassembly and reassembly.

d. Reassembly. Refer to figure 3-14 and

(2) Refer to figure 3-15 and remove the

tilt cylinders.

reassemble the hydraulic pump. Make sure vanes are

b. Disassembly. Refer to figure 3-16 and

placed in the rotor with the sharp edge leading in the

direction of rotation.

disassemble the tilt cylinders.

e. Installation.

c. Cleaning, Inspection and Repair.

Install the hydraulic pump

(1) Clean all parts with dry cleaning

solvent (Federal Specification P-D-680).

3-14. Tilt Cylinders

(2) Inspect piston rod for spots of base

a. Removal.

metal showing through, and for pitting. Inspect wiper

rings for deterioration. Inspect all parts for breaks,

(1) Remove the front floor plates (TM 10-

3930-611-12).

3-17