 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 DRIVE AXLE
Figure 11.
Figure 9.
Figure 12.
Figure 10.
10. Remove rivets and separate ring gear and case.
Do not remove gear unless it is necessary.
If
taining collar has been removed and only if necessary.
replacement of the ring gear is required, the rivets
To remove the collar, cut it in two with a cold chisel and
should be drilled from the gear side, using a drill slightly
hammer.
larger than the rivet itself. (Fig. 14) The remaining
portion of the rivet can then be driven out with a punch.
8. Lift out differential and gear assembly.
9. Mark differential case halves, cut lock wires,
and remove bolts from case. Figure 12. Separate
halves. Figure 13 is an exploded view of the differential
assembly.
B-122
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals