Figure 24. - TM-10-3930-607-150139

TRANSMISSION

Figure 24.

Figure 26.

NOTE: If the springs are not all the

same height the first separator plate

is incorrectly installed.

Place the pressure plate on top of the

springs, using two mounting bolts to align the bolt holes.

(Fig. 27) Remove the bolts.

Figure 25.

Place the center thrust washer on the

forward clutch hub, making sure the teeth on the back of

the washer engage the teeth on the gear hub. Slide the

inner and outer clutch springs into the empty tooth

spaces of the clutch ring and onto the tangs of the first

separator plate. (Fig. 26)

Figure 27.

B-103