 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TRANSMISSION
Figure 15.
Figure 14.
C. CLEANING AND INSPECTION
8.
Unscrew the transmission mounting bolts.
Pull the transmission case away from the torque
1.
Steam clean the transmission case. Apply
converter housing. (Fig. 17) Remove the differential
the steam pressure directly into the internal oil passages
pinion only if necessary.
to make sure they are completely open and clean.
Remove all foreign particles from corners and crevices.
9.
Remove the parking brake drum. (Fig. 18)
Remove any detergent used as a cleaning agent with
live steam made from clear water. Get the case as hot
10. Remove the pinion shaft nut and drum
as possible with the live steam. Blow water off the
flange. (Fig. 19) Disassemble the internal brake and
entire case and out of the passage. Apply oil to all
remove its backing plate.
machined surfaces.
Squirt oil into the passages.
Remove all gasket material.
11. Remove the seal retainer. (Fig. 20) Note
thickness of shim set. Pull bearing retainer out of the
2.
Clean the remainder of parts with solvent
case. Note thickness of shim set.
and blow dry with filtered compressed air. Always use
fresh solvent when cleaning ball and roller bearings. Do
12.
Press the pinion shaft through the front of
not direct air
the case.
B-99
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals