Disassemble the clutch pack as follows:

TRANSMISSION

Lift clutch pack from the transmission using

NOTE: The reverse cluster gear can

the tool shown in Figure 8, and illustrated in Figure 9. If

be removed at this time, without

preferred, the pack may be slung for removal from the

removing the clutch pack. (Fig. 6)

housing. Three-inch belting makes a good sling.

Figure 8.

Figure 6.

Unscrew the mounting bolts securing the

clutch pack to the main drive shaft flange.

NOTE: There are four groups of three

bolts in the clutch pack. The center

bolts in each group are assembly

bolts (Fig. 7) and hold the pack

together. The other eight screws

hold the clutch pack to the converter

output shaft. Do not remove the

assembly bolts at this time;

otherwise the pack will fall apart.

Figure 9.

Disassemble the clutch pack as follows:

Mark the relationship of each end

housing and clutch ring. (Fig. 10)

Figure 7.

B-97