Figure 46.

ENGINE

If there is evidence of either, a new thrust plate should

7. Assemble the cam gear to the camshaft. Hold

be installed.

the camshaft forward so there is no possibility of its

bumping the expansion plug at the rear end, forcing it

out of position, and causing an oil leak. Check end play.

8. Inspect crankshaft thrust washers (Fig. 48) for

wear and scoring.

Replace if necessary before

reassembling gear.

Figure 46.

Figure 48.

9. Drive the crank gear on to the shaft (Fig. 49)

making sure that the marked teeth on the cam gear

straddle the marked tooth on the crank gear. (Fig. 50)

Figure 49.

Figure 47.

B-16