Receptacle Connector

4-43. Voltage Regulator and Bracket

4-42. Receptacle Connector

a . On-Equipment Testing. Refer to paragraph 4-

a. Removal. Refer to figure 4-26, and remove the

40a for on-equipment testing of the voltage

receptacle connector.

regulator.

b . Installation. Refer to figure 4-26, and install

b. Removal. Refer to figure 4-27, and remove the

the

receptacle

connector.

v o l t a g e regulator and bracket.

CAUTION

c. Installation. Refer to figure 4-27, and install

When cables are replaced, insure that

t h e voltage regulator and bracket.

t h e positive (+) cable be equipped with

d . A d j u s t m e n t . Refer to figure 4-28, and adjust

the large battery post connector and that

t h e voltage regulator.

the negative (-) cable be grounded to

the

engine.

When

installing

the

receptacle,

place

the

positive

(+)

connection up in relation to its mounted

position.

4-28