 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-242-34
death. When removing axles, be sure the
(3) Reinstall control panel, control knobs
truck is blocked to prevent oscillation.
and overhead guard (TM 10-3930-242-12).
b. Installation.
( 4 ) Install the rear steering pump.
( 5 ) Refer to the lubrication order, and fill
(1) Refer to figure 2-3 and install the axle
t h e transmission,
assembly.
( 2 ) Install propeller shaft, steering cylinder
2-7. Axle Assemblies
a n d linkage, hydraulic hoses, oscillating cylin-
a. Removal.
der and wheels (TM 10-3930-242-12).
(1) Use a suitable lifting device and raise
( 3 ) Remove the blocking and lower forklift
and block the forklift truck under the main
t r u c k on to the axle assembly.
frame. Be careful not to crush the brake tubing.
2-8. Boom Assembly
( 2 ) Remove propeller shaft, steering cylin-
a. Removal.
der and linkage, hydraulic hoses, oscillating cy-
linder, and wheels (TM 10-3930-242-12).
(1) Remove
overhead
guard
(TM
{3) Refer to figure 2-3 and remove the axle
10-3930-242-12).
( 2 ) Remove
assembly
(TM
carriage
assembly.
NOTE
10-3930-242-12).
Remove both axles in a similar manner.
( 3 ) Disconnect hydraulic hoses and discon-
n e c t slave cylinder and extension cylinder from
WARNING
the boom assembly (TM 10-3930-242-12).
( 4 ) Remove the inner boom.
Never crawl under forklift truck while
( 5 ) Disconnect
cylinders
(TM
lift
p e r f o r m i n g maintenance unless it is
10-3930-242-12).
blocked securely. Failure to observe this
( 6 ) Remove fuel t a n k (para 3-17).
warning may result in serious injury or
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals