 |
|||
|
|
|||
|
Page Title:
Hydraulic Oil Tank Air Cleaner |
|
||
| ||||||||||
|
|
 (3) Remove and discard filter element.
(2) Remove screws and washers, then re-
move oil strainer screen from tank.
b. Cleaning. Wash inside of filter case thor-
(3) Plug openings, then flush tank thor-
oughly with SD and dry thoroughly.
oughly with SD and drain.
e. Installation. Reverse procedures in a above.
(4) Wash oil strainer screen thoroughly
and dry with compressed air.
Use a new element and gasket. Fill system per
lubrication order and check for leaks,
b. Installation. Reverse procedures in a
above. Use a new gasket when installing oil
d. Removal of Oil Filter.
strainer screen. Fill system as per lubrication
(1) Disconnect hydraulic lines and catch
order.
oil in a receptacle.
(2) Remove screws, nuts, and washers
fastening filter and mounting bracket
a. Removal. Remove cap by turning it coun-
to engine mounting bracket.
terclockwise and lifting it off.
(3) Remove screws, nuts, and washers;
b. Cleaning. Wash thoroughly in SD and dry.
then remove filter from clamping
c. Installation. Reverse procedure in a above.
bracket.
e. Installation. Reverse procedures in d
above. Fill system per lubrication order and
a. Remove Element.
check for leaks.
(1) Remove pipe plug (fig. 31) from bot-
tom of filter case and drain oil.
(2) Remove clamping ring screws and
When replacing any of the hydraulic lines
nuts, then remove clamping rings,
and fittings, use figure 32 as a guide.
cover, and cover gasket.
AGO 6217A
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals