 |
|||
|
|
|||
|
Page Title:
Figure 98 Tilt control value, exploded view. |
|
||
| ||||||||||
|
|
 1
Elbow
8
Elbow
9
Elbow
2
Fitting
3
Packing, preformed
10
Packing, preformed
11
Packing, preformed
4
Flow divider
5
Lockwasher
12
Elbow
13
Elbow
6
Capscrew
14
Bracket, mounting
7
Packing, Preformed
Figure 97-- Continued
e. Installation. Reverse procedures in a above.
65.
Hydraulic Tank
a. Removal:
(1) Drain hydraulic fluid from the tan.
(2) Remove engine (par. 12).
(3) Remove mounting capscrews and battery
carrier.
(4) Remove hydraulic tank filter (TM 10-
3930-222-20).
(5) Disconnect tank outlet at tank.
(6) Remove capscrews (7, fig.
99) and
lockwasher (86) tat secure control valve
mounting bracket (82) to tank (22). Move
bracket to one side and remove gasket
(16).
(7) Remove air cleaner (18), elbow (19),
nipple (20), and fitting (17) from tank.
(8) Remove oil level gage (21).
(9) Remove capscrews (24) and lockwasher
(25) that secure tank elbows (26) to frame
(10) Remove capscrews (27),. lockwasher
(28), washer (29), and nuts (80) that
secure bottom of clamps to bottom of
frame and remove clamp.
(11) Remove tank from truck.
b. Cleaning an Repair
(1) Refer to TM 10-3930-222-20 for cleaning
procedures
(2) Straighten tank as necessary
1
Plugs, tube
(3) Using necessary safety precautions, weld
2
Packing, preformed
cracks, leaks, or other reputures.
3
Springs
4
Balls, steel
c. Installation. Reverse procedures in a above.
5
Adapters
6
Packing, preformed
66. Tilt Cylinder
7
Spring
8
Spool
a. Removal. Refer to TM 10-3930-222-20.
9
Packing, preformed
b. Disassembly.
10
Spacer
(1) Remove setscrew (2, fig. 100) from
11
Packing, preformed
threaded washer (3).
12
Adapter, pipe to tube
13
Elbows, tube
14
Elbows, tube
15
Body Value
Figure 98 Tilt control value, exploded view.
AGO 7010A
118
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals