Figure 27. Forward-and-reverse clutch pack, mounted to drive plate.

Figure 27. Forward-and-reverse clutch pack, mounted to drive plate.

(17) Remove friction disks (30) and separator plates

(8) Remove separator ring plate (33) from

(34) alternately.

assembly.

(18) Remove clutch ring (29) from front housing

(9) Remove the lower inner and outer re-traction

assembly (22).

springs (31 and 32) from assembly.

(19) Remove retaining ring (28) from re-verse gear

(10) Remove retaining ring (7) from shaft assembly

assembly (18).

(9).

(20) Remove clutch hub (27) from gear assembly

(11) Remove bearings (2) from shaft assembly.

Turn clutch pack assembly over and proceed

(18).

from other end.

(21) Remove gear assembly (18) from housing

assembly (22).

(12) Remove retaining ring (13) from shaft assembly

(22) Remove ring seals (19 and 20) from housing

(9).

assembly (22).

(13) Remove bearing (15) from shaft assembly.

(23) Remove clutch piston (25) from housing

(14) Remove thrust washer (17) from shaft (9).

(15) Remove reverse drive gear assembly (18) from

assembly (22) by turning housing assembly over

and gently tapping the edges so the piston will

clutch pack.

fall out.

(16) Remove thrust washer (10) from shaft assembly

(9).

AGO 7010A