Transmission - TM-10-3930-630-120026

TM 10-3930-630-12

3-16.

Transmission

bring to operating level

(1) Lift hinged door on right end of floor

General. The transmission is mounted

plate.

(2) With engine operating at idle speed

forward at the engine and the torque converter is directly

remove transmission oil level gage (fig. 3-4), and check

coupled to the flywheel with flex plates.

b. Service.

oil level. Level should be to full mark on gage.

Operator service of the

transmission is limited to checking the oil level and

adding oil to

TA034773

Figure 3-4. Transmission filler cap and level gage.

3-17.

Hydraulic Filter Element Indicator

(3) To add oil, remove filler cap and fill to full

mark on gage. Refer to current lubrication order for

proper grade of oil.

General A hydraulic filter element

indicator (fig.3-5) is mounted below the hydraulic control

valve

3-8