 |
|||
|
|
|||
|
Page Title:
ATTACHMENT CONTROL VALVE REPAIR |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
16
This Task Covers:
a. Disassembly
c. Inspection
b. Cleaning
d. Assembly
INITIAL SETUP
Materials/Parts (Cont)
Tools and Special Tools
Rags, Lint-free (Item 34, Appendix B)
Tool Kit, General Mechanic's: Automotive
Lockwashers (16)
(Item 23, Appendix D)
Packing, Preformed
Wrench, Torque, 0 - 175 lb-ft (0 - 237 Nm)
Packing, Preformed
(Item 28, Appendix D)
Packing, Preformed (2)
Equipment Condition
Packing, Preformed
Attachment control valve removed
Packing, Preformed (2)
(TM 10-3930-660-20)
Packing, Preformed
Packing, Preformed (2)
Materials/Parts
Packing, Preformed(2)
Oil, Lubricating, Transmission/Hydraulic
Packing, Preformed
(Item 30, Appendix B)
a. Disassembly.
12
10
(1)
Disassemble attachment control
13
5
valve parts (1 through 34).
16
6
17
(a)
Mark housing sections (1 through 4)
of valve assembly. These marks will
15
11
be used for ease of assembly.
6
14
(b)
Position attachment control valve so
7
it is resting on inlet housing (5).
NOTE
Use care when removing outlet
4
housing and housing sections. Be
7
3
8
careful not to lose shuttle plates,
9
2
springs, and pistons that may eject
1
from inlet housing and housing
TR00747
sections.
(c)
Remove two nuts (6), four nuts (7), stud (8), two studs (9), and outlet housing (10).
(d)
If damaged, remove plugs (11 and 12) from outlet housing (10).
(e)
Separate housings (1 through 4) and inlet housing (5).
(f)
Remove one preformed packing (13) and two preformed packings (14) from each face of
housings (1 through 4). Discard preformed packings.
NOTE
Housing section closest to outlet housing has no shuttle plate.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals