SOUND SUPPRESSION PANELS REPLACEMENT

TM 10-3930-673-34

14-4. SOUND SUPPRESSION PANELS REPLACEMENT

This Task Covers:

a. Removal

c. Inspection

b. Cleaning

d. Installation

INITIAL SETUP

Materials/Parts

Tools and Special Tools

Adhesive 3-M No. 80 (Item 1, Appendix B)

Tool Kit, General Mechanic's: Automotive

Solvent, Drycleaning P-D-680

Single-edge Razor

Equipment Condition

Seat removed (TM l0-3930-673-20)

Windshield washer reservoir removed

(TM 10-3930-673-20)

Fire extinguisher bracket removed

(TM 10-3930-673-20)

a. Removal.

WARNING

Drycleaning Solvent (P-D-680) is TOXIC and flammable. Wear protective goggles and

gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes;

and do not breathe vapors. Keep away from heat or flame. Never smoke when using

solvent; the flashpoint for type I drycleaning solvent is 100F (38C), type II is 138F

(59C), and type III is 200F (93.3C). Failure to do so may result in injury or death to

personnel.

If personnel become dizzy while using cleaning solvent, immediately get fresh air and

medical help. If solvent contacts skin or clothes, flush with cold water. If solvent

contacts eyes, immediately flush eyes with water and get immediate medical

attention.

NOTE

Sound suppression panels are glued to vehicle. Use a single edged razor blade to cut

panels from vehicle. After removing panel, scrape away as much of old adhesive and

panel material as possible. Remove remainder of old adhesive with cleaning solvent

(refer to cleaning instructions [Para 2-12]).