 |
|||
|
|
|||
|
Page Title:
CAB ASSEMBLY WITH ROPS/FOPS REPLACEMENT/REPAIR |
|
||
| ||||||||||
|
|
 TM 10-3930-673-34
(2)
Tag, mark, and disconnect STE/ICE
shunt (TM 10-3930-673-20).
(3)
Tag, mark, and disconnect wiring
connector (5) and ground cable (6)
from vehicle frame (7) stud.
Tag, mark, and disconnect wiring
connector (5) and ground cable (6).
Remove nut (8), washer (9), wiring
connector, and ground wire from vehicle
TR01785
frame (7) stud.
(4)
Remove STE/ICE diagnostic
receptacle (10) and resistor
module (11) from cab.
(a)
Remove four screws (12), nuts (13),
and lockwashers (14) from STE/ICE
diagnostic receptacle (10). Discard
TR00004
lockwashers.
(b)
Remove four screws (15), nuts (16),
18
and lockwashers (17) from resistor
11
module (11). Discard lockwashers.
15
(c)
Reach inside cab console (18) and
position STE/ICE diagnostic
receptacle (10) and resistor
module (11) so they can be pulled
10
from bottom of cab.
16
17
(d)
Remove STE/ICE diagnostic
receptacle (10) and resistor
module (11) from bottom of cab.
12
14
13
TR01786
14-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals