REAR PLANETARY WHEEL ENDS REPLACEMENT - continued

TM 10-3930-673-34

(c)

Wobble wheel hub and disc

assembly (14) to unseat oil seal (17),

inner bearing cone (18), and outer

bearing cone (19).

(d)

Remove outer bearing cone (19)

from wheel bearing spindle (12).

(e)

Remove wheel hub and disc

assembly (14).

(f)

Remove inner oil seal (17) from

wheel bearing spindle (12).

(g)

Remove inner bearing cone (18)

from wheel bearing spindle (12).

(h)

Remove two bearing cups (20) using

a suitable puller from wheel bearing

spindle (12).

TR00280

(5)

Remove wheel bearing spindle (12)

parts (21 through 25).

(a)

Remove 10 screws (21), four

screws (22), and 14 washers (23)

from wheel bearing spindle (12).

CAUTION

Inner oil seal and bushing in bore of

spindle can be damaged when

sliding spindle past axle splines.

Remove spindle carefully to avoid

damaging bushing and inner oil

TR00459

seal. Failure to do so could cause

premature component failure.

(b)

Remove wheel bearing spindle (12).

(c)

Remove oil seal (24) from wheel bearing spindle (12).

(d)

If damaged, remove bushing (25) from wheel bearing spindle (12).

b. Cleaning. See Cleaning Instructions (Para 2-12).

9-35