REAR DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT/REPAIR/ ADJUSTMENT - continued

TM 10-3930-673-34

9-5. REAR DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT/REPAIR/

ADJUSTMENT (CONT)

TR00444

(h)

Use press and suitable sleeve driver to install bearing cone (16) on flange case half (22).

(i)

Use press and suitable sleeve to install bearing cone (17) on plain case half (21).

(j)

Apply gear lubricant to inside surfaces of both case halves (21 and 22), two thrust washers

(23), two side gears (24), and four pinion gears (25).

(k)

Place flange case half (22) on bench, ring gear (18) teeth up.

(l)

Install one thrust washer (23) and side gear (24) into the flange case half (22).

(m) Install four pinion gears (25) and four pinion gear thrust washers (26) on differential

spider (27). Install differential spider assembly into flange case half (22).

(n)

Install second side gear (24) and thrust washer (23) over spider (27) and differential pinion

gears (25).

(o)

Place plain case half (21) over flange case half (22) and gears (24 and 25). Rotate plain case

half as needed to align match marks.

9-22