FRONT DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT/REPAIR/ADJUSTMENT - continued

TM 10-3930-673-34

8-5. FRONT DIFFERENTIAL CARRIER ASSEMBLY REPLACEMENT/REPAIR/

ADJUSTMENT (CONT)

(h)

Install two cotter pins (15) that hold

two bearing adjusting rings (16) in

position. Install cotter pins through

boss of bearing cap (14) and between

lugs of adjusting ring.

TR00275

g. Installation.

deleted

(1)

Install differential carrier (3) into

axle housing (2).

NOTE

Inside of axle housing and mounting flange where carrier fastens should be clean and

dry before installing carrier.

(a)

Install companion flange (4), washer (5), and nut (6) onto bevel pinion (12).

Change 1