TRANSMISSION FRONT COVER REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are

harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-

ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately

with soap and water.

(g)

Apply sealing compound to cover (35) and press onto front cover (1).

(3)

Install hydraulic piston pump drive adapter

(25) on front cover (1).

(a)

Install bearing roller (30) and bearing (29)

on shaft of auxiliary pump gear (31).

WARNING

Use care when installing snap and

retaining rings. Snap and retaining rings

are under spring tension and can act as

projectiles when released and could cause

severe eye injury.

(b)

Install snap ring (28) on shaft of auxiliary

TR00233

pump gear (31).

(c)

Slide parts (28 through 31) as an

assembly into hydraulic piston pump drive adapter (25).

(d)

Install preformed packings (26 and 27) on hydraulic piston pump drive adapter (25).

(e)

Install hydraulic piston pump drive adapter (25), four lockwashers (24), and screws (23) on front cover

(1).

7-47