TRANSMISSION ASSEMBLY REPLACEMENT/REPAIR - continued

TM 10-3930-673-34

(4)

Install parts (33 through 36 and 40 through 43) on transmission (3).

(a)

Place a drift and wedge between capscrew (40) and mounting bracket (41) to prevent screw

from moving when installing nut (42)

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin

or clothing, wash immediately with soap and water.

(b)

Apply sealing compound to threads of screw (40). Install nut (42), washer (43), rubber

mount (44), on screw and mounting bracket (41). Tighten nut to 307 lb-ft (416.2 Nm).

(c)

Apply sealing compound to threads of two screws (33). Install two rubber mounts (36),

washers (35), nuts (34), and screws. Tighten nuts to 307 lb-ft (416.2 Nm).

(d)

Remove slings from transmission (3).

NOTE

Install tie wraps as required.

(5)

Connect two wires (31) to neutral safety switch (32).

(6)

Connect hose (29) at main control

valve (30) (between main control

valve assembly and priority valve).

TR00198

7-37